Tuesday, February 14, 2012

1988 Fat Chance Wicked

Just thought I'd throw up a quick set of pics of the 88 Wicked before I box it up for it's overseas voyage. This was a fun bike to work on, and ride around for a little while. Los Angeles was definitely the place for it, as evidenced by the number of "You must be a Laker's fan" comments I received when riding it around town (for the record I'm not).
 
 
 
 
The bike was in pretty good shape, and just needed a few things done to it. I installed new BB bearings, overhauled the headset, replaced cables and housings, put on some old school tires and a gave it a general tune up. Although it didn't hurt the performance in any way the shifters, brakes, brake levers, cranks were all really ratty so I freshened them up a bit here and there. Otherwise the old girl was in tip top shape, a real testament to the old adage "They don't build them like they used to."






These two-tone Wickeds (as well as other unusual colors) are getting harder and harder to come by, (especially in good condition) so it's nice to see this one going to a good home. Hopefully it'll see some singletrack in the near future and not be relegated to another 10 years as a garage queen.


Sunday, February 12, 2012

1991 / 92 Yeti Ultimate

So, the third time's the charm! I missed two opportunities to buy a Yeti Ultimate recently, but finally persevered and landed this one. It's fairly late model, Colorado built Ultimate (U11xx), with the later style graphics. Fortunately the original owner didn't succumb to the trends and kept the original Accutrax fork. The bike was built with rather crappy Shimano DX components and most of them were in pretty poor and non functional condition.



If I had to find one word to describe the Ultimate it would be "scrappy." The bike just has this affable quality that makes you smile. I don't know whether it's the design, the color or something else, but I just feel good when working on it. I hope riding it results in a similar feeling.



My attempt at a full build stalled out this weekend due to part shortages. Turns out I am short on 68mm bottom brackets, the wheels I have slated for the bike need to be rebuilt and cranks and brakes need to be polished up. I decided to go with a 7-spd in favor of XTR, just seemed more appropriate. If I have time I'll try to built up some Ringle wheels (front is ready to go) to go along with the silver Chris King headset, ATAC stem, Hyperlite bars, Cook Bros cranks and silver Grafton brakes. I am considering swapping the CBR cranks in favor or Bullseyes, and replacing the wheels with Bullsyes... TBD





The welds on the bike are very fine, and the overall craftsmanship is amazing. There are a lot of little details in the design, such as the reinforcement fore the front derailleur cable, the rear brake cable guide/support and of course, the loop stays and curved downtube.

I am thrilled to have the bike and look forward to completing it and taking it for a spin!!

1992 Klein Adroit Rebuild

The Klein Adroit was one of my dream bikes growing up , but at about $3000-4000 for the fuselage it was always out of reach. Nowadays these bikes are extremely rare (especially with a strata fork) and finding one takes a huge stroke of luck. I had just such a stroke of luck about two years ago when a good friend of mine found this bike for sale here in LA. The bike used to belong to a local mountain bike racer from Knapps bicycle shop. The bike was built with all fairly high end parts, and with a few exceptions (replaced XT front and rear derailleurs with XTR) I kept it stock.





One of the highlights of the build is a rather rare prototype Ringle front hub. Knapps must have had a good connection with Ringle to get one of these. The hub is a very interesting design, it uses straight spokes much like the Pulsar design from the early 90s.



The bike is a great survivor. It has a plethora of battle scars, but all in all is in great shape and goes like the clappers.
It's great to have the old girl up and running and I'm looking forward to many future miles of riding!

1992 Klein Adroit

Well, after two years sitting idle in my garage, the 92 Adroit got an overhaul and went out on it's first ride. I have to say, I forgot what it's like to ride a fully rigid, large diameter tube Aluminum mountain bike. Although Palos Verdes does not have the most technical terrain, there are definitely long downhill sections that had my fillings falling out and a couple times I got thrown from the bike on some really steep sections, fortunately landing butter side up =)




More on the ride and build later...

Tuesday, February 7, 2012

Second day of cleaning up M900 cranks

The first two sets of test subjects spent another night in the tumbler after some hand sanding of the trouble areas.





The ends of the crank arms are proving to be the most difficult and require the most work. I can't wait until I have my new Foredom flex shaft tool to take a one more bit of manual labor out of this process.

The first two cranks are coming along nicely. I think some more bench time to finish cleaning up the ends and some other local imperfections and tonight I can try them with the finer ceramic media to attempt a polish finish.



Little more work required on the non-drive side arms.

Monday, February 6, 2012

First pair of XTR cranks come out after 8 hours in tumbler

Good start, still trying to evaluate the different media and burnishing compound mixes.
At this point most of the small scratches and pits are gone, now I'll try the rotary flex tool top clean up some of the larger and deeper gauges on the ends. Just need to get some finer polishing wheels and other attachments.
Stay tuned for more results



 

Sunday, February 5, 2012

First batch of M900 XTR cranks go in the tumbler

Started polishing the first set of M900 cranks, here are a few before pics.

Results coming up...