So, the third time's the charm! I missed two opportunities to buy a Yeti Ultimate recently, but finally persevered and landed this one. It's fairly late model, Colorado built Ultimate (U11xx), with the later style graphics. Fortunately the original owner didn't succumb to the trends and kept the original Accutrax fork. The bike was built with rather crappy Shimano DX components and most of them were in pretty poor and non functional condition.
If I had to find one word to describe the Ultimate it would be "scrappy." The bike just has this affable quality that makes you smile. I don't know whether it's the design, the color or something else, but I just feel good when working on it. I hope riding it results in a similar feeling.
My attempt at a full build stalled out this weekend due to part shortages. Turns out I am short on 68mm bottom brackets, the wheels I have slated for the bike need to be rebuilt and cranks and brakes need to be polished up. I decided to go with a 7-spd in favor of XTR, just seemed more appropriate. If I have time I'll try to built up some Ringle wheels (front is ready to go) to go along with the silver Chris King headset, ATAC stem, Hyperlite bars, Cook Bros cranks and silver Grafton brakes. I am considering swapping the CBR cranks in favor or Bullseyes, and replacing the wheels with Bullsyes... TBD
The welds on the bike are very fine, and the overall craftsmanship is amazing. There are a lot of little details in the design, such as the reinforcement fore the front derailleur cable, the rear brake cable guide/support and of course, the loop stays and curved downtube.
I am thrilled to have the bike and look forward to completing it and taking it for a spin!!
Sunday, February 12, 2012
1992 Klein Adroit Rebuild
The Klein Adroit was one of my dream bikes growing up , but at about $3000-4000 for the fuselage it was always out of reach. Nowadays these bikes are extremely rare (especially with a strata fork) and finding one takes a huge stroke of luck. I had just such a stroke of luck about two years ago when a good friend of mine found this bike for sale here in LA. The bike used to belong to a local mountain bike racer from Knapps bicycle shop. The bike was built with all fairly high end parts, and with a few exceptions (replaced XT front and rear derailleurs with XTR) I kept it stock.
It's great to have the old girl up and running and I'm looking forward to many future miles of riding!
One of the highlights of the build is a rather rare prototype Ringle front hub. Knapps must have had a good connection with Ringle to get one of these. The hub is a very interesting design, it uses straight spokes much like the Pulsar design from the early 90s.
The bike is a great survivor. It has a plethora of battle scars, but all in all is in great shape and goes like the clappers.
1992 Klein Adroit
Well, after two years sitting idle in my garage, the 92 Adroit got an overhaul and went out on it's first ride. I have to say, I forgot what it's like to ride a fully rigid, large diameter tube Aluminum mountain bike. Although Palos Verdes does not have the most technical terrain, there are definitely long downhill sections that had my fillings falling out and a couple times I got thrown from the bike on some really steep sections, fortunately landing butter side up =)
More on the ride and build later...
More on the ride and build later...
Tuesday, February 7, 2012
Second day of cleaning up M900 cranks
The first two sets of test subjects spent another night in the tumbler after some hand sanding of the trouble areas.
Little more work required on the non-drive side arms.
The ends of the crank arms are proving to be the most difficult and require the most work. I can't wait until I have my new Foredom flex shaft tool to take a one more bit of manual labor out of this process.
The first two cranks are coming along nicely. I think some more bench time to finish cleaning up the ends and some other local imperfections and tonight I can try them with the finer ceramic media to attempt a polish finish.
Monday, February 6, 2012
First pair of XTR cranks come out after 8 hours in tumbler
Good start, still trying to evaluate the different media and burnishing compound mixes.
At this point most of the small scratches and pits are gone, now I'll try the rotary flex tool top clean up some of the larger and deeper gauges on the ends. Just need to get some finer polishing wheels and other attachments.
Stay tuned for more results

At this point most of the small scratches and pits are gone, now I'll try the rotary flex tool top clean up some of the larger and deeper gauges on the ends. Just need to get some finer polishing wheels and other attachments.
Stay tuned for more results
Sunday, February 5, 2012
First batch of M900 XTR cranks go in the tumbler
Started polishing the first set of M900 cranks, here are a few before pics.
Results coming up...
Sunday, January 29, 2012
Refinishing Shimano M900 XTR cranks
In my experience (read: opinion) the Shimano M900 gruppo is one of those defining mountain bike component gruppos. They looks amazing on nearly ever bike (92-95 of course) and most high end projects would not be the same without them. Of course I am not the only one who thinks this way and consequently these parts are very hard to find and more often then not come at a high premium for mint to NOS parts.
Used and abused parts are not hard to find. Probably the most abused are the cranks and rear derailleurs. I currently find myself replete with about 10-11 M900 gruppos, ranging from beat to Mint/NOS and among all those parts I noticed that the cranks are one component I can probably restore.
As best as I can tell the cranks come from the factory with a complicated finish process. First they appear to be forged and then the critical features were machined for precision. Then they are clear anodized to prevent the Auminum from oxidizing. The last step is a satin finish clear coat to achieve that unique bluish/gunmetal finish M900 is known for. The Shimano M900 is either ink stamped or applied via transfer decal just prior to clear coating.
So, here are some early pics of my first attempt at refinishing M900 cranks. I've only done some basic surface prep in the tumbler. still a lot to do to achieve the polished finish to get it ready to anodzing.
Above - Top crank is a scratched up example with clear coat stripped / Bottom crank after 2-3 hours in tumbler (was in same condition before)
Below - Close up pics of both cranks for comparison.
So, the tumbler removed a lot of the surface imperfections. Now I need to do some manual clean up on the end of the crank arm to remove some deeper gouges and then back into the tumbler for a higher polish finish.
Used and abused parts are not hard to find. Probably the most abused are the cranks and rear derailleurs. I currently find myself replete with about 10-11 M900 gruppos, ranging from beat to Mint/NOS and among all those parts I noticed that the cranks are one component I can probably restore.
As best as I can tell the cranks come from the factory with a complicated finish process. First they appear to be forged and then the critical features were machined for precision. Then they are clear anodized to prevent the Auminum from oxidizing. The last step is a satin finish clear coat to achieve that unique bluish/gunmetal finish M900 is known for. The Shimano M900 is either ink stamped or applied via transfer decal just prior to clear coating.
So, here are some early pics of my first attempt at refinishing M900 cranks. I've only done some basic surface prep in the tumbler. still a lot to do to achieve the polished finish to get it ready to anodzing.
Above - Top crank is a scratched up example with clear coat stripped / Bottom crank after 2-3 hours in tumbler (was in same condition before)
Below - Close up pics of both cranks for comparison.
So, the tumbler removed a lot of the surface imperfections. Now I need to do some manual clean up on the end of the crank arm to remove some deeper gouges and then back into the tumbler for a higher polish finish.
Subscribe to:
Posts (Atom)











